|
|
Programming Your
Feature Keys (Black Telephones only)
Looking at your telephone set, you will typically see
a Call 1, Call 2, Pickup, and IC (Intercom) keys. These keys are
not
user-programmable. The other keys are, and may have been previously set.
To return all feature keys to their original default values:
- With the handset in the cradle, dial
∞ 7395.
To display the current feature key values:
- With the handset in the cradle, dial
∞ 7396.
- Press the feature key(s) you want displayed.
- Press the SPKR key to hang up.
To program a
user-programmable feature key:
- With the handset in the cradle, dial
∞ 7397.
- Press the feature key you want to program.
- Dial the feature code or extension number you want to store under that
key. (If you frequently need to pick up calls for someone else, you may
wish to program their extension number on one of your feature keys. Then,
when they receive a call, it will flash on this key and you then can press the
PICKUP key and the feature key to answer their call.)
NOTE:
All programmable feature codes can be found here:
http://www.usao.edu/infoservices/intertelcodes.htm
©
University of Science and Arts of Oklahoma
1727 West Alabama, Chickasha, Oklahoma USA 73018
Phone: Chickasha: (405) 224-3140
Last Updated
30 Jul 2008 08:37 AM
